Flex CS 40 WET User Manual

CS 40 WET
17
EU countries only Do not throw electric power tools into the
household waste!
In accordance with the European Directive 2012/19/EC on Waste Electrical
and Electronic Equipment and transposition into national law used electric
power tools must be collected separately and recycled in an environmentally
friendly manner.
NOTE!
Please ask your dealer about disposal options!
-Declaration of Conformity
We declare under our sole responsibility that the product described under
“Technical specifications” conforms to the following standards or normative
documents:
EN 60745 in accordance with the regulations of the directives
2004/108/EC (until 19.04.2016),
2014/30/EU (from 20.04.2016),
2006/42/EC, 2011/65/EC.
Responsible for technical documents:
FLEX-Elektrowerkzeuge GmbH, R & D Bahnhofstrasse 15, D-71711
Steinheim/Murr
16.10.2015
FLEX-Elektrowerkzeuge GmbH
Bahnhofstrasse 15, D-71711 Steinheim/Murr
Exemption from liability
The manufacturer and his representative are not liable for any damage and
lost profit due to interruption in business caused by the product or by an
unusable product.
The manufacturer and his representative are not liable for any damage which
was caused by improper use of the power tool or by use of the power tool with
products from other manufacturers.

Flex CS 40 WET Specifications

General

Brand	Flex
Model	CS 40 WET
Category	Saw
Language	English