Need help?Do you have a question about the Flex CS 40 WET and is the answer not in the manual?
Explains warning symbols, cautions, and notes used in the manual for user guidance.
Provides essential safety guidelines and warnings for operating the power tool.
Detailed safety instructions specific to operating saws, including handling and maintenance.
Specific operational guidelines to ensure safe use and prevent accidents during cutting.
Covers initial setup, testing the PRCD, and installing the blade for safe operation.
Lists key technical data like supply power, rated current, blade size, and cut thickness.
Provides a general introduction and purpose of the CS 40 WET tool.
Instructions on how to adjust the water flow for the blade during wet cutting.
Steps to set and lock the desired cutting depth for the saw.
Detailed procedure for safely removing and installing a new blade.
Guide on using the parallel guide for making straight cuts.
Instructions for setting and securing the saw for angled cuts.
Explains the two-step process for safely operating the trigger switch.
Step-by-step guide for performing tile cuts using the wet saw.
Guidelines for cleaning and maintaining the power tool for longevity.
Information regarding the tool's gearing and lubrication maintenance.
Information on authorized repair services and power cord replacement.
Details on obtaining replacement parts and additional accessories.
Instructions on how to properly dispose of the electric power tool and its components.
Official declaration stating the product meets relevant EU directives and standards.
Disclaimer regarding manufacturer liability for damages from improper use or third-party products.
To Next Page
General
