Flex CS 40 WET User Manual

CS 40 WET
12
counterclockwise direction while using the solid wrench to fix the spindle.
CAUTION!
Do not over-tighten!
Adjustment the water valve

Turn the water valve to the position for maximum water flow onto the
blade.

Turn the water valve to the position to stop the water flow.
Adjustment the cutting depth

Turn off the tool and remove the plug from the electrical outlet.

Loosen the cutting depth lever.

Flex CS 40 WET Specifications

General

Brand	Flex
Model	CS 40 WET
Category	Saw
Language	English