Flex CS 40 WET User Manual

CS 40 WET
11

Use the socket wrench supplied to unscrew the spindle bolt in a clockwise
direction while using the solid wrench to fix the spindle.

Remove the bolt and the outer flange.

Inner flange (A) remains on the spindle.

Fit the blade supplied onto the motor shaft.

Make sure that the rotation direction of blade corresponds to the arrow on
the blade guard.

Replace the outer flange and then replace the spindle bolt.

Finally, use the socket wrench to tighten the spindle bolt in a

Flex CS 40 WET Specifications

General

Brand	Flex
Model	CS 40 WET
Category	Saw
Language	English