Need help?Do you have a question about the Flex GE MH 18.0-EC and is the answer not in the manual?
Denotes impending danger. Non-observance may result in death or extremely severe injuries.
Denotes a possibly dangerous situation. Non-observance may result in slight injury or damage to property.
Denotes application tips and important information.
Indicates the need to read the operating manual before using the tool.
Signifies that eye protection must be worn during operation.
Indicates that the machine should be disposed of according to specific guidelines.
Essential safety warnings and instructions for safe operation.
Defines the designed purpose and authorized applications of the wall sander.
Guidelines for using correct accessories, respecting speed limits, and ensuring proper fit.
Guidance on wearing appropriate PPE like face shields, goggles, dust masks, and hearing protection.
Measures for keeping bystanders at a safe distance and ensuring operator safety.
Precautions on gripping, cord management, and stopping the tool before setting down.
Advice on maintaining grip, positioning body, and avoiding snagging for kickback prevention.
Explanation of kickback as a sudden reaction to accessory binding and its causes.
Tips on maintaining grip, using auxiliary handles, and positioning body to resist kickback forces.
Advice on using appropriately sized sanding paper and avoiding oversized discs.
Guidelines on extension cables, sanding lead paint, and handling hazardous substances.
Information on measured noise and vibration values, and factors influencing them.
Recommendation to wear ear protection at sound pressure levels above 85 dB(A).
Identification and numbering of all parts of the sanding tool.
Instructions for unpacking, checking accessories, and charging batteries.
Guidance on connecting the extraction hose to the 32 mm connector.
Step-by-step instructions for attaching and changing the sanding head.
Procedure for inserting and removing the battery, including safety precautions.
How to check the battery charge level using indicator LEDs.
Instructions for connecting and using a Class M dust extractor.
Procedure for attaching sanding sheets to the Velcro pad.
Instructions for brief and continuous operation using the switch rocker.
How to set the desired operating speed using the speed selection dial.
Guidance on mounting and using the optional bar-type handle for stability.
Information on using the adapter for connecting suction hoses of different dimensions.
Techniques for holding the tool, connecting systems, and applying pressure.
Explanation of the brush ring's role in parallel contact and dust retention.
Techniques for sanding walls and ceilings with the swivel head.
How to use the triangular head for corner sanding, noting its vibrating action.
Instructions for cleaning the tool and its components.
Steps for removing and replacing the Velcro or backing pad.
Procedure for removing the old brush ring and fitting a new one.
Guide on replacing worn protective corners on the triangular sanding head.
Note regarding not loosening housing screws during the warranty period.
Information on obtaining other accessories and finding exploded drawings online.
Guidelines for rendering redundant tools unusable and proper EU collection.
Instructions for the safe disposal and recycling of used batteries.
Statement of compliance with relevant EU directives and standards.
Manufacturer's disclaimer regarding damages from improper use or third-party products.
To Next Page
General
