Need help?Do you have a question about the Flex PXE 80 12.0-EC and is the answer not in the manual?
Explains symbols like WARNING, CAUTION, and NOTE used throughout the manual.
Details symbols found on the power tool itself, such as voltage (V) and rotation rate (r.p.m).
Provides essential safety warnings and instructions to follow before operating the power tool.
Describes the specific applications and purposes for which the polisher is designed.
Outlines critical safety warnings and guidelines for polishing operations with the tool.
Explains kickback as a sudden reaction to a pinched or snagged rotating accessory.
Provides precautions and advice to avoid kickback forces during operation.
Ensures polishing bonnet or attachment strings do not spin freely to prevent entanglement.
Details noise and vibration measurements determined according to EN 62841 standards.
Lists key technical data including battery, weight, temperature ranges, and charger.
Identifies and describes the numbered features of the power tool as shown in Figure A.
Instructions for inserting, replacing, and checking the battery state of charge.
Guidance on how to attach and change tool holders and accessories to the spindle.
Advice on foam wear during polishing and the importance of timely replacement.
Instructions for operating the switch, brief operation, and preselecting the speed.
Procedures for cleaning the power tool and its interior components.
Information on obtaining spare parts and accessories via manufacturer's catalogues.
Details the one-year limited warranty for professional power tools and accessories.
Instructions on how to obtain warranty performance and contact information.
To Next Page
General
