To Next PageTo Next Page
Need help?Do you have a question about the Flex RSP DW 18.0-EC and is the answer not in the manual?
General| Voltage | 18 V |
|---|---|
| Power Source | Battery |
| Electronic Management System (EMS) | Yes |
| Battery Type | Lithium-Ion |
| Brake | Yes |
| Dust Extraction | Yes |
Key technical specifications including machine type, voltage, battery options, stroke rate, stroke, material thickness, and weight.
Explanation of symbols that denote impending danger, potentially leading to death or severe injury if not observed.
Explanation of symbols indicating a potentially dangerous situation that may result in slight injury or property damage.
Explanation of symbols that denote application tips and important information for users.
Symbols indicating the need to read the manual before use and wear protective equipment like goggles and ear defenders.
Symbol indicating disposal information for the old machine, directing users to relevant pages.
Visual identification of all numbered components of the power tool, including handles, switches, and battery slots.
Mandatory instructions to read before use, including operating instructions and general safety guidelines for power tools.
Defines the intended use of the sabre saw, covering materials and types of cuts it is designed for.
Essential safety rules for operating the sabre saw, covering handling, workpiece securing, and kickback prevention.
Instructions on avoiding hazardous materials and prohibiting drilling holes into the power tool housing.
Presents typical A-weighted noise levels and total vibration values for sawing wood and chipboard.
Explains how vibration emission levels are measured and factors that can affect exposure during use.
Unpacking, checking parts, and initial battery charging.
Procedures for inserting, removing, and checking the state of charge of the battery.
Instructions for inserting, changing, and discharging used saw blades.
Guidance on choosing appropriate saw blades for the material and fitting them correctly.
Warnings about cutting teeth, protective gloves, and keeping the tool holder clean.
How to adjust the stroke rate using the thumb wheel for different materials.
Explanation of the two stroke types: straight and pendulum, and their applications.
How to set the cutting support to limit saw blade cutting depth and reduce vibrations.
Instructions on how to use the power tool's switch to start, stop, and control stroke rate.
Guidance on holding the tool firmly, clamping the workpiece, and post-operation blade cooling.
Methods for sawing metal, wood, and performing cuts directly at the wall.
Proper technique for plunge cuts in wood and plastic, including blade length and material restrictions.
Instructions for cleaning the power tool and storing it in its carry case after use.
Information on using the charger, charging tips, and advice for long battery service life.
Procedure for inserting batteries into the charger and understanding the display indicators.
How to interpret display errors for battery or charger faults.
Regular cleaning of the power tool and ventilation slots, including dust removal.
Warning against loosening gear head screws during the warranty period to avoid invalidating claims.
Information directing users to authorized customer service centers for repairs.
Guidance on obtaining spare parts and accessories, referring to manufacturer catalogues.
Instructions to render power tools unusable before disposal to prevent accidental operation.
EU regulations for collecting and recycling used electric power tools separately from household waste.
Warnings against improper battery disposal and EU regulations for recycling defective or used batteries.
Declaration of the product's conformity to relevant EU directives and standards.
Manufacturer's limitations of liability for damage caused by improper use or third-party products.
