Flex TRINOXFLEX BME 18.0-EC + LK 152 - User Manual

BME 18.0-EC + LK 152
BME 18.0-EC + BR 50
BME 18.0-EC + BF 140
BME 18.0-EC + BS 50

Flex TRINOXFLEX BME 18.0-EC + LK 152 Specifications

General

Battery Voltage	18 V
Spindle Thread	M 14
Type	Angle Grinder
No Load Speed	3500-8500 rpm
No-load speed	3500-8500 rpm

Summary

Symbols and Safety Information

General Safety Instructions

Read before use and act accordingly. Covers intended use.

Safety - Fillet Weld Grinding Attachment

Intended Use & Warnings

General Safety Notices

Use as sander/grinder, observe all instructions and diagrams.

Safety - Burnishing Attachment

WARNING, General Use & Prohibitions

Safety - Burnishing Attachment (cont.)

Safety - Kickback

Kickback Definition & Prevention

Explains kickback and provides techniques for resistance and hand safety.

Safety - Kickback (cont.) & Special Notices

Safety - Pipe Belt Sanding Attachment

WARNING! Dry Sanding & Water Hazard

Read safety notices; use dry sanding only; water ingress is hazardous.

Safety - Pipe Belt Sanding Attachment (cont.)

Operational Safety Guidelines

Noise and Vibration

CAUTION! Hearing Protection

Wear ear defenders at sound pressure above 85 dB(A).

Battery Information and Handling

WARNING! Battery Removal for Work

Remove battery before performing any work on the power tool.

Attachment Mounting and Removal

Mounting Attachments

Removing Attachments

Attachment Removal (cont.)

Detaching Attachment Steps

Notices for Burnishing Attachment & Fillet Weld Grinding Attachment

CAUTION! Tool Run-on

Tool continues to run briefly after switching off.

Changing Grinding Disc

Pipe Belt Sanding Attachment BR 50

WARNING! Battery Removal & Belt Replacement

Remove battery before work; procedure for fitting/changing sanding belt.

CAUTION! Belt Rotation Direction

Observe belt rotation direction. Must match arrow on gear head.

Changing the Rollers

Fitting or Changing Sanding Belt (BF 140)

CAUTION! Belt Rotation & Replacement Steps

Observe belt rotation; procedure for detensioning, fitting, tensioning belt.

Belt File Sanding Attachment BF 140

Belt File Sanding Attachment BF 140 (cont.)

Belt Fitting & Rotation Caution

Procedure for fitting belt and caution on rotation direction.

Handle Mounting and Belt Direction Adjustment

Changing the Sanding Arm

Operation Modes

CAUTION! Tool Integrity Risk

Risk of injury from disintegration. Use appropriate tools for the task.

Maintenance and Care

WARNING! Battery Removal

Remove battery before performing any maintenance or care on the power tool.

Cleaning

WARNING! Electrical Safety & Slot Cleaning

Use earth leakage breaker. Clean ventilation slots regularly.

Carbon Brushes

Gear Head Maintenance and Repairs

Disposal Information

WARNING! Tool Inoperability & Battery Removal

Make tools inoperable before disposal; remove battery from battery tools.