Flex SD 5-300 4.0 - User Manual

SD 5-300 4.0SD 5-300 4.0
ELEKTROWERKZEUGE

Flex SD 5-300 4.0 Specifications

General

Battery Voltage	18 V
Max. Drilling Diameter in Steel	13 mm
Category	Power Tool
Voltage	18 V
Battery Capacity	5.0 Ah
Chuck Capacity	13 mm
Model	Flex SD 5-300 4.0

Summary

Symbols Used in Manual

Symbols on Power Tool

For Your Safety

Safety Instructions for Screwdriver

Safety Instructions for Li-ion Batteries

Noise and Vibration

Technical Data

Overview

Operating Instructions

Before Switching On Power Tool

Instructions for initial setup: unpacking, inspection, and preparation before first use.

Charging the Battery

Step-by-step process for charging the tool's battery using a USB charger.

Install and Remove Bit

Procedure for attaching and detaching bits, with a caution regarding bit temperature.

LED Worklight

Details on the functionality and automatic shut-off of the integrated LED worklight.

Selecting a Torque

Guidance on adjusting and setting the appropriate torque level using the indicator.

Selecting Rotation Direction

Before Use

Driving Screw

Maintenance and Care

Cleaning

Advice on the proper frequency and method for cleaning the power tool.

Spare Parts and Accessories

Information on obtaining replacement parts and compatible accessories for the tool.

Disposal Information

Instructions for environmentally sound disposal of the power tool and its batteries.

Declaration of Conformity

Exemption from Liability

Manufacturer's disclaimer regarding damages from improper use or product malfunction.