Flex SMS 190 18.0-EC - Technical Specifications and Product Overview; Operating and Storage Conditions; Cutting Capacity Data; Product Component Identification

28
SMS 190 18.0-EC
should also be considered during which the
power tool is switched off or even running,
but not actually in use. This may significantly
decrease the exposure level over the total
working period. Identify additional safety
measures to protect the operator from the
effects of vibration such as: maintain the tool
and the accessories, keep the hands warm,
organisation of work patterns.
CAUTION!
Wear ear protection at a sound pressure
above 85 dB(A).
Technical specifications
SMS 190
18.0-EC
Machine Type DC Mitre Saw
Rated Voltage V d.c 18
No Load Speed
RPM
(revolutions
per min)
5500
Blade Diameter in(mm)
7-1/2 in
(190mm)
Blade Arbor Hole
Diameter
mm 30
Weight (Without
Battery pack)
kg 13
Battery Ah AP 18.0/5.0
Weight battery
– AP 18.0/5.0
kg 0.72
Laser Wavelength nm 650
Laser Power mW <0.39
Laser Grade 1
Max. Mitre Angle °
48° right, 48°
left
Max. Bevel Angle °
48° right, 48°
left
Mitre Detents Left °
0°,15°,22.5°,
31.6°,45°
Mitre Detents
Right
°
0°,15°,22.5°,
31.6°,45°
Bevel Stops Left ° 0°,45°,48°
Bevel Stops Right ° 0°,45°,48°
Recommended
working
temperature
℃ -10℃-40℃
Recommended
storage
temperature
℃ -40℃-70℃
Cutting Capacities:
Mitre/Bevel Angle
Height x
Width
Horizontal Vertical
0° 0° mm 66×245
45°
(leftward/
rightward)
0
°
mm 66×172
0°
45°
(rightward)
mm 22×245
0°
45°
(lefttward)
mm 42×245
45°(rightward) 45° mm 22×172
45°(lefttward) 45° mm 42×172
Overview (see figure A)
The numbering of the product features refers
to the illustration of the machine on the
graphics page.
1 Lock-off Buttons
2 Main Handle
3 On/Off Switch
4 Laser Switch
5 Lower Blade Guard
6 Saw Blade
7 Upper Blade Guard
8 Depth-control Knob
9 Bevel Scale
10 Bevel-angle Indicator
11 Bevel-stop Lever
12 Work Clamp
13 Sliding Fence(left and right)
14 Fixed Fence
15 Saw Base
16 Mitre Table
17 Mitre Scale