Flex WST 700 VV - Operating Instructions; Technical Specifications

WST 700 VV / WST 700 ECO
19
Technical specifications
Operating instructions
Before switching on the angle
grinder
 Unpack power tool and accessories
and check that no parts are missing
or damaged.
Attaching/changing the sanding
head
`^rqflk>
_ÉÑçêÉ=éÉêÑçêãáåÖ=~åó=ïçêâ=çå=íÜÉ=ÉäÉÅíêáÅ=
éçïÉê=íççäI=éìää=çìí=íÜÉ=ã~áåë =éäìÖK
To attach:
 Press the two locks on the tool change
head (1.).
 Put the tool change head on the sanding
head (2.). Rotate sanding head until it
engages. The locks move back to their
original position.
Machine type Wall sander WST 700 VV/ECO
Mains voltage V/Hz 230/50 110/50
Protection class I I
Power input W 710 600
Power output W 420 350
Round sanding head
– Diameter
– Speed
mm
min
-1
~ 225
1100–1700
Triangular sanding head (accessory)
– Edge length
– No load stroke rate
– Sanding stroke
mm
min
-1
mm
~ 295
3300–5100
1.5
Length
– minimum
– maximum
mm
mm
1330
1730
Connection-Ø of dust extractor mm 32
Weight (without power cord) kg 4.8