Flexitron Webdyn WebdynModbus - Page 37

contact@webdyn.com | webdyn.com
V1.0 subject to changes | Webdyn © by Flexitron Group
37
Parameters that are common to all interfaces:
VARIABLE DEFINITION COMMENTS DEFAULT VALUE
DAQ_Period Collection interval in minutes
common to all data sources
Possible value from
1 to 59 minutes
10
DAQ_
PeriodSec
Collection interval in seconds
common to all data sources
Considered only if DAQ_Period
is equal to 0.
Possible value from
0 to 59 seconds
0
DAQ_
HeaderOption
Enable/Disable display of
column headers in the data les
0=disabled; 1=enabled
0
Generic parameters that characterise the bus:
VARIABLE DEFINITION COMMENTS DEFAULT VALUE
MODBUS_
Mode
Mode for serial communication
with Modbus devices:
0: RS232
1: RS485, 2 wires
2: RS485, 4 wires
Bus RS232 or
RS485 with 2 or 4
wires
1
MODBUS_
BaudRate
Speed of the serial link:
1200
2400
9600
19200
38400
57600
115200
9600