4.0 USING MAESTRO
4.0 USING MAESTRO
Step 1. Starting Maestro for the First Time
Turn on your FLEX-6000 series radio. Do NOT start SmartSDR
if it is available. Don't be concerned with the CAT and DAX
applications at this time.
Turn on Maestro by momentarily pressing and releasing the
POWER button on the front upper left side of the unit. The
button will blink green indicating the unit is powering up.
Maestro will start after a few seconds.
The Maestro welcome screen will appear on start-up. This
screen can take several seconds to appear.
If using WiFi to connect to the FLEX-6000 transceiver, choose
the network to connect to by tapping on the oered network
names. Follow the screen prompts to enter security information
to make the WiFi connection.
To Next Page
Loading...
Need help?
General
