FlexRadio Maestro - Getting Started

MAESTRO QUICK START GUIDE, VER. 5.0, 02/15/2024 | 5
Δ - If any defect, abnormal result, or other observations occur
that are not covered by this Quick Start Guide; immediately
cease operation and contact the manufacturer or local
distributor for operational advice or repair of the unit.
i - No other physical modication of this device is allowed. Any
other use or modication (including software changes that
a󰀨ect operational characteristics) may void the manufacturer’s
warranty.
i - Do not leave the Maestro unit in an insecure place to avoid
use by unauthorized persons.
i - Please study the complete Quick Start Guide and Maestro
User Manual. These documents contain important information
regarding the safe operation of this unit. If you have any
questions, please contact the manufacturer or local distributor
for further information.
1.0 GETTING STARTED
Supplied Accessories:
The following accessories and materials are included with
your Maestro Control Console. Carefully remove the Maestro
from its shipping container, unpack and identify the items listed
below.
• One (1) FlexRadio Maestro device
• One (1) Fixed angle mounting stand with three M4 x 8
phillips screws
• One (1) 6ft. (2.1m) CAT 5E Ethernet cable
• One (1) AC/DC power supply with a 24VDC output with
the proper power connector.
• One (1) Maestro Quick Start Guide (QSG)
1.0 GETTING STARTED