Thank you for purchasing the Maestro Control Console for the
FLEX-6000 Series radios from FlexRadio Systems. This Quick
Start Guide (QSG) will walk you through the steps for setting
up and operating your Maestro control console. Please read
all included documentation before proceeding and store this
guide and all other contents, including the shipping container,
for future reference and use.
The Quick Start Guide is designed to get you on the air with
minimum eort. To acheive this, we presuppose a foundational
understanding of HF installation and home networking setup,
without exploring the extensive range of potential complexities
associated with conguring home networks.
This QSG provides the basic steps to set up and operate
your Maestro. For more information, refer to the Maestro
documentation, which can be found on our website at www.
exradio.com
If you run into any trouble during the set-up process, please:
• Re-check your steps.
• Refer to next paragraph, "Need Assistance"
Need Assistance?
If you encounter any issues installing or operating your Maestro,
please use our online Community to search for information
about SmartSDR and the FLEX-6000. If you need assistance
using the Community, please refer to the Community Message
Board for additional information.
If you are unable to nd an existing answer to your issue via
the Community, please contact FlexRadio Technical Support by
opening a HelpDesk support ticket online.
For details on how to submit a HelpDesk support ticket, please
refer to the HelpDesk article "How to Submit a Request for
Techinical Support.
Hours of operation:
Our Technical Support engineers are available Monday from
7:00am - 4:00pm Central Standard Time (CST). If you open a
HelpDesk ticket after business hours, on a holiday, or weekend,
we will respond to your request for assistance during regular
business hours in the order your HelpDesk ticket was received.
To Next Page
Loading...
Need help?
General
