Need help?Do you have a question about the FLI LOADED 450s and is the answer not in the manual?
General| Channels | 4 |
|---|---|
| Power Output | 450W |
| Frequency Response | 20Hz - 20kHz |
| Signal to Noise Ratio | >90dB |
| Input Sensitivity | 200mV - 6V |
| Crossover Slope | 12dB/octave |
| LPF | 50Hz - 250Hz |
| Bass Boost Frequency | 45Hz |
| THD @ 4 Ohms | 0.05% |
| Crossover Type | LPF/FULL/HPF |
| Bass Boost | 0dB / +6dB / +12dB |
| Impedance | 2 Ohms |
Details the 12-month warranty, validation, and return process for FLI goods.
Information on manual content copyright and FLI's registered trademarks.
Proper mounting ensures amplifier longevity and heat dissipation.
Guidance on selecting and routing power cables and fuse placement.
Details on ground, remote turn-on, and RCA cable connections.
Explains low level input, high level input, and gain control settings.
Details crossover selection, frequency, and bass boost controls.
Step-by-step guide for setting the amplifier's gain control and crossovers.
Illustrates input connections for CD players and head units.
Wiring diagram for connecting speakers in a 2-channel stereo setup.
Wiring diagram for connecting speakers in a bridged mono setup.
Troubleshooting steps for when the amplifier does not power up.
Diagnosing issues related to the protection LED and amplifier overheating.
Guidance on blown fuses and resolving distorted sound.
Technical details including RMS power, impedance, and dimensions.
Information on optional accessories like line level converters and wiring kits.
To Next Page
