Document Title Document No. Revision
Date Section
Supplement S3 to the AMM CTLS-LSA –
CTLS-LSA with ROTAX 912iS
AF 0480 0011 00 05-Aug-12 05-00-2
Approval Ref.: Approved on the Basis of Manufacturer Self Declaration
A&P: An Airframe and Powerplant mechanic as defined by 14 CFR Part 65 in
the U.S. or equivalent certification in other countries.
● Note: For certificated persons such as an A&P, RLSA-M or persons working
under the auspices of a Repair Station, prior experience will be
considered when determining the training required.
● Note: Participation in training described in this manual shall not be construed
as an implicit authorization by Flight Design to perform inspections or
repairs beyond the limitations set forth in the applicable regulations of
the governing aviation authority.
For and questions or comments regarding maintenance procedures or minimum levels of
certification, email Flight Design at airworthiness@fiightdesign.com.
To Next Page
Loading...
