Document Title Document No. Revision
Date Section
Supplement S3 to the AMM CTLS-LSA –
CTLS-LSA with ROTAX 912iS
AF 0480 0011 00 05-Aug-12 05-20-4
Approval Ref.: Approved on the Basis of Manufacturer Self Declaration
Inspection and/or Required Maintenance
Checklist
100hour
Annual
Other Times
Minimum
Level of
Certification
Initials /
Remarks
Engine. Conduct 200 hrs inspection as per
Maintenance Manual for
ROTAX
®
Engine Type 912 iS Series.
200
hrs
A&P
Engine. Conduct 600 hrs inspection as per
Maintenance Manual for
ROTAX
®
Engine Type 912 iS Series.
600
hrs
A&P
Engine cowling. Inspect for cracks, chafing, heat
damage, delamination, exhaust or fluid leaks,
condition of fastening system, and condition of
paint.
Pilot/Owner
Engine control panel. Check for full range of
travel, stop adjustment and required friction.
Remove cover and check levers for damage, cracks,
corrosion. Check cables for wear and security.
Refer to Section 76-00.3.1.3
RLSA-M
Cooling air ducts, engine baffling and cylinder
cooling fins. Check for obstructions, cracks, wear
and general condition. Check for signs of abnormal
temperatures.
Refer to CHAPTER 75
Pilot/Owner
Oil and coolant radiator. Check for obstructions,
leaks and security of attachment. If necessary
clean cooling ribs.
Refer to Section 75-00.3.1
Pilot/Owner
Coolant hoses and lines. Check for damage,
leakage, hardening from heat, porosity, for loose
connections and secure attachments. Check
routing for kinks and restricted elbows. Check fire
protection shielding.
Refer to CHAPTER 75
RLSA-M
Oil Lines. Inspect for damage, leakage, hardening
from heat, porosity, security of connections and
attachments. Verify routing for kinks or restricted
elbows. Check fire protection shielding.
Refer to CHAPTER 79
RLSA-M
Oil tank vent line. Check for proper routing, for
obstructions and clear passage
Refer to CHAPTER 79
Pilot/Owner
Fuel lines. Check for damage, leakage, hardening
from heat, porosity, secure connections and
attachments. Verify routing for kinks or restricted
elbows. Steel fuel lines if applicable additionally
check for cracks and for scuffing marks. Check fire
protection shielding on the all fuel lines in engine
and pilot compartment.
RLSA-M