FLIGHT DESIGN CT - 71-00.3.2 Engine Mount Inspection

Document Title Document No. Revision Date Section
Supplement S3 to the AMM CTLS-LSA –
CTLS-LSA with ROTAX 912iS
AF 0480 0011 00 05-Aug-12 71-00-4
Approval Ref.: Approved on the Basis of Manufacturer Self Declaration
71-00.3.2 Engine Mount Inspection
The engine is attached to the primary aircraft structure by a strong steel engine mount.
The small engine mount is attached directly to engine. The small engine mount is attached
to the Big Engine mount with rubber shock mounts.
Fig. 71-00-2
Fig. Item Part Name Torque Reference
1 Big Engine Mount KF71200100
2 Small Engine Mount С9997796X
3 Shock Mount C9997789L
4 Shock Mount Washer Part of set C9997789L
5 Screw M10
KF71000009, KF71000010, KF71000011,
KF71000013
6 Spacer
KF71000005, KF71000006, KF71000007,
KF71000008
7 Washer C9996506
8 Self-Locking Nut M10 35 Nm C9996337
9 Washer KF71000012
10 Washer C9996567
11 Screw M8 C9996259V
12 Self-Locking Nut M8 22.5 Nm C9996336
13 Lock Washer 10.7 C9996570D
14 Screw M10 35 Nm KF71200001, KF71200002, KF71200004,
71-00-2
15 Spacer Bush KF71000018