Do you have a question about the FlightScope X3 and is the answer not in the manual?
Type | Launch Monitor |
---|---|
App Compatibility | FlightScope Apps |
Category | Fitness Equipment |
Accuracy | High |
Portability | Portable |
Indoor/Outdoor Use | Both |
Battery Life | 5 hours |
Connectivity | Wi-Fi, USB |
Data Parameters | Ball speed, launch angle, spin rate, carry distance |
Power Source | Rechargeable battery |
Precautions for operation, service, repair, and regulatory compliance.
FCC compliance, limits, and effects of unauthorized modifications.
Compliance with Industry Canada license-exempt RSS standards and operating conditions.
Solutions for common issues like unit not switching on, low battery, and battery drain.
Overview of key technologies like Fusion Tracking, multi-frequency radar, and image processing.
LED indicator states for system status (power, operation, errors).
LED indicator states for battery charging levels and status.
LED indicator states for battery charge levels when the device is running.
Safety information regarding the lithium-ion battery, including replacement and disposal.
Guidelines for transporting the X3 battery on airplanes according to FAA and IATA specifications.
Warning about electrical shock hazards related to the AC adapter and wet conditions.
Precautions to avoid pinching fingers or hands when operating the device legs.
Explanation of LED indicator patterns for different battery charge levels.
Warnings and cautions regarding the use of power adapters to prevent electric shock and damage.
Guidelines for proper recycling, disposal, and safe handling of the battery.
Identifying items that cause false triggers and methods to prevent them.
Procedure for marking balls with stickers for indoor measurements and orienting the dot.
Troubleshooting steps for when the unit fails to switch on, checking power and leg extension.
Solutions for low battery run time and batteries draining quickly, including capacity loss and self-discharge.
Troubleshooting steps for issues where shots are not displayed or the sensor fails to connect.