EasyManua.ls Logo

FlightScope X3 - Troubleshooting; Unit Not Switching On Issues; Battery Related Issues

FlightScope X3
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SYMPTOM
POSSIBLE CAUSE & REMEDY
Unit does not switch on
Make sure that the battery is charged, or
otherwise connected to a main power source
with the AC adapter.
Make sure the leg is extended.
Low battery run time
Rechargeable batteries lose capacity over time.
If your batteries have become too poor to use,
contact FlightScope Support for a new battery.
Batteries run down
Make sure to charge batteries for 8-10 hours
until full.
When stored for a length of time, batteries will
lose charge due to self-discharge. If a unit has
not been used for a while, it is recommended to
first charge the batteries or run it with the AC
power adapter.

Related product manuals