Flipper Two-Device Universal - Default Chapter; Table of Contents

INDEX
Flipper can work with a TV Only or a STB (STB is set top box =
cable box).
Flipper has three set up methods: Code Entry, Code Search and
Learning.
1. Code Entry:
a. TV Only .................................................... 4
b. TV and STB ............................................ 5
c. Soundbars ............................................... 7
2. On / Off options: ......................................... 7
3. Code Search: ................................................. 8
4. Learning: ......................................................... 9
Some Tips:
If red light does not work as indicated, then Unlock and Reset:
Unlock: press and hold ADD till solid, then 956; Light blinks out.
Repeat with TV and STB;
Reset: press and hold ADD till solid, then 954. Light blinks out.
3