On/Off Options:
Flipper is preset to turn on and off the TV and STB by default.
Occasionally, a user may experience one device on while the other
is off.
To Modify so only TV turns on and off:
TV Only: Press and hold ADD till light turns solid, then enter 999.
Then turn off any standby or power saver in the box.
TV and STB: Press and hold ADD till light turns solid, then enter
998.
Reset to factory settings: Press and hold ADD until the light
turns solid, enter 954.
Sound Bars:
Many soundbars can be controlled by the TV. Check
your TV settings to see if this is possible. This is the best
practice. If not, then please see online for instructions:
Support>FAQS>Soundbars.
7
To Next Page
Loading...