In some boxes, LC will trigger a Menu. If it does,
do not use LC;
In other boxes, LC will trigger a Menu only in 4 digit
channels. If so, then use LC for all but 4 digit channels.
1. Program Favs: Press and hold STB and ADD at same time till
light turns solid;
2. Add channels: (Try two to test):
a. Channel entry format: 7-LC-ADD; 44-LC-ADD;
for channels 7, 44;
3. Exit: Press and release the STB button to exit, test; Let the
channel change before pressing CH again;
a. If your box does not work with the LC, then delete or
reset (below) and try format: 23-ADD; 456-ADD, for 23,
456. (Using 0’s may speed changing in lower digits,
like 009).
4. If working, then add all your channels by repeating 2.
Deleting Favorites:
Press and hold the STB and DEL at the same time till light turns
solid, then enter the channel you want to delete, followed by
DEL: 12-LC-DEL or 12-DEL.
Please note that you must delete exactly what was programmed -
the resulting channel is not always what was programmed. This is
because if a channel is not in the channel lineup, then the box will
go to the closest channel.
Reset to factory settings: Press and hold ADD until the light
turns solid, enter 954.
6
To Next Page
Loading...