Need help?Do you have a question about the FLIR A700 Series and is the answer not in the manual?
General| Thermal Sensitivity | < 30 mK |
|---|---|
| Frame Rate | 30 Hz |
| Accuracy | ±2°C or ±2% of reading |
| Resolution | 640 x 480 |
| Spectral Range | 7.5 - 13 μm |
| Operating Temperature Range | -20°C to 50°C |
| Digital Interfaces | GenICam |
| Power | 12-24 VDC |
| Storage Temperature | -40°C to 70°C |
| Weight | 1.1 kg |
| Lens Options | 13mm, 24mm, 42mm |
Recommendations for annual calibration verification and available services.
Details on how to submit a technical question, including required information.
Step-by-step guide for accessing and logging into the camera's web interface.
Explains the functions and tools available within the main Camera tab.
Details the management and configuration options in the Administration tab.
Covers various camera settings including general, alarms, and network configurations.
Diagram and details for the Ethernet connector and cable wiring.
Explains the functions of the power/error LED and factory reset button.
Instructions for cleaning the camera's external components.
Detailed instructions for safely cleaning the sensitive infrared lens.
Importance of calibration for accurate thermal measurements.
Describes the calibration process performed by FLIR Systems.
Explains Non-Uniformity Correction (NUC) for image quality.
Details how to adjust thermal image contrast and brightness.
To Next Page
