Need help?Do you have a question about the FLIR E54 and is the answer not in the manual?
General| Resolution | 320 x 240 pixels |
|---|---|
| Accuracy | ±2°C (±3.6°F) or ±2% of reading |
| Field of View | 24° × 18° |
| Focus | Manual |
| Digital Camera | 5 MP |
| Laser Distance Meter | No |
| Image Modes | MSX, Picture-in-Picture |
| Connectivity | Wi-Fi, Bluetooth |
| Battery Life | 4 hours |
| Storage Media | SD card |
| Weight | 1 kg |
| Minimum Focus Distance | 0.15 m |
| Spectral Range | 7.5 – 14 µm |
| Operating Temperature Range | -15°C to 50°C |
| Storage Temperature Range | -40°C to 70°C |
| Thermal Sensitivity | < 0.04°C (40 mK) |
Warnings related to FCC compliance, radiofrequency exposure, and product modifications.
Warnings about laser beam exposure and potential eye irritation.
Warnings about handling, charging, and potential hazards of the battery.
Cautions for camera operation, environment, and battery handling to prevent damage.
Cautions regarding cleaning the infrared lens and its anti-reflective coating.
General instructions for charging the camera battery.
Step-by-step guide for using the stand-alone battery charger.
Instructions for charging the battery via the USB battery charger.
Instructions for charging the battery via a USB cable to a computer.
Importance and methods for adjusting the thermal camera focus.
General information about the laser distance meter.
How to measure areas using the camera and laser distance meter.
How to assign different functions to the programmable button.
Explains the need for calibration when changing lenses.
Step-by-step instructions for performing the AutoCal calibration.
Recommended procedure for calibrating the camera's compass.
How to save an image by pulling the trigger.
How to set up automatic or manual uploads to FLIR Ignite.
Steps to pair the camera with a FLIR Ignite account.
How to configure automatic image uploads.
How to open and view images and video clips from the archive.
Importance of focus and methods for adjustment.
How to adjust focus manually using the focus ring.
How to use the autofocus function and its safety warnings.
Methods for automatic and manual image adjustment.
How to adjust image using touch screen controls.
Methods for manual adjustment using the navigation pad.
How to select appropriate temperature ranges for measurement.
How to select different color palettes for image display.
Explanation of NUC and how to perform it.
Step-by-step guide to choose an image mode.
How to add or remove measurement tools from the display.
How to create and edit custom measurement tool presets.
How to move and resize measurement tools on the screen.
How to set parameters like emissivity, object distance, etc.
How to set measurement parameters globally for the camera.
How to change parameters for specific measurement tools.
How to show max, min, avg, and area values in the result table.
How to calculate the difference between two measurements.
How to set alarms based on temperature conditions.
How to configure alarms for spot measurements.
How to configure alarms for box/circle measurements.
How to configure alarms for difference calculations.
How to use color alarms to detect anomalies and temperature levels.
How to configure basic color alarms (above, below, interval).
Steps to prepare and start an inspection.
How to capture images and data at inspection points.
How to edit status, delete images, or add comments.
How to move inspection data to a computer or FLIR Ignite.
Methods for creating inspection route files.
How screening alarms detect anomalies by comparing measurements to reference samples.
Steps involved in setting up and performing a screening alarm.
How to activate and set up the screening alarm.
How to record reference samples for screening.
How to perform the screening process and check for alarms.
How to configure the camera as a Wi-Fi access point.
How to connect the camera to an existing Wi-Fi network.
How to merge data from external FLIR meters into infrared images.
To Next Page
