Inspection Route18
The Inspection Route overlay consists of the following parts:
• Back arrow
Tap to go to the previous inspection point.
• Current point indicator
◦ Displays the name of the current inspection point.
◦ Displays an image icon if there is an image saved for the inspection point.
◦ Displays the status of the inspection point.
• Next arrow
Tap to go to the next inspection point.
• Document icon
This icon is displayed if there is a description and/or comment available for the inspec-
tion point. A description comes from the inspection route file and can, for example, in-
clude instructions or reminders for the inspection point. Comments are text notes
added during the inspection. Tap the icon to display the description and/or comment.
18.2.1 Drop-down menu
To display the drop-down menu, tap the current point indicator.
In the drop-down menu it is possible to:
• Set the status of the current inspection point.
• View the filenames of images and videos saved for this inspection point.
• Add comments for the current inspection point.
• Open the inspection list, see section 18.2.2 Inspection list.
18.2.2 Inspection list
The inspection list gives an overview of the routes and their progress. It also allows edit-
ing of the inspection route.
The contents of the inspection list are defined by the inspection route file. The route
structure and names come from the file.
To open the inspection list, tap the current point indicator and then tap Inspection list.
#T810587; r. AD/90967/90989; en-US
97
To Next Page
Loading...
Need help?
General
