Camera settings
23
Example: FLIR0001. (When the counter has reached 9999, the file name will
change to IR_yyyyy.jpg.)
◦ Date prefix: A prefix will be added to the filename, including the date and the text
“IR_” for images and “MOV_” for videos. Examples: IR_2015-04-22_0002 and
MOV_2015-04-22_0003. The date format will follow the Date & time format setting,
see section 23.6 Device settings.
◦ Date + time only: The filename will only include the date and time of capture
(YYYYMMDDhhmmssfff).
Note With the Date prefix and Date + time only settings, the files may not automati-
cally be detected by third-party applications.
• Delete all saved files...: This displays a dialog box where you can choose to perma-
nently delete all the saved files (images and videos) from the memory card or to can-
cel the delete action.
23.6 Device settings
• Language, time & units: This submenu includes settings for a number of regional
parameters:
◦ Language.
◦ Temperature unit.
◦ Distance unit.
◦ Time zone.
◦ Date & time.
• Focus
12
: This submenu includes the following settings:
◦ Autofocus: When autofocusing, the infrared camera can use one of the following
focus methods:
– Contrast: The focus is based on maximizing the image contrast.
– Laser: The focus is based on a laser distance measurement. The laser is on
when the camera is autofocusing.
◦ Continuous autofocus: This setting is used to enable/disable continuous autofocus.
• Display settings: This submenu includes the following settings:
◦ Screen rotation: This setting defines if the orientation of the overlay graphics will
change according to how you hold the camera.
◦ Image overlay information: This setting specifies what image information the cam-
era will display as an overlay on the image. For more information, see section 6.4.5
Image overlay information. You can select the following information to display:
– Compass.
– Date & time.
– Emissivity.
– Reflected temperature.
– Distance.
– Relative humidity.
– Atmospheric temperature.
Note This setting only specifies what information to overlay on the image. All im-
age information is always saved to the image file and is available in the image
archive.
◦ Screen brightness: The screen brightness slider is used to control the brightness
of the screen.
Note You can also control the screen brightness on the swipe-down menu. For
more information, see section 6.4.4 Swipe-down menu.
#T810587; r. AD/90967/90989; en-US
113
12.This item is dependent on the camera model.
To Next Page
Loading...
Need help?
General
