Need help?Do you have a question about the FLIR ONE Edge Series and is the answer not in the manual?
General| Focus | Fixed |
|---|---|
| Frame Rate | 8.7 Hz |
| MSX | Yes |
| Video Recording | Yes |
| Resolution | 160 x 120 pixels |
| Connectivity | USB-C |
| Visual Camera | Yes |
| File Formats | JPEG, MP4 |
| Operating Temperature | 0 °C – 35 °C |
| Sensor Type | Uncooled microbolometer |
| Compatibility | iOS and Android |
Crucial instructions for safe and proper operation of the device.
Information on product registration, software downloads, and support resources.
Official statement regarding the device's compliance with regulatory standards.
Guidelines for responsible disposal of the device to protect the environment.
Advises on RF exposure guidelines and minimizing human contact during operation.
Warns against using the camera in high temperatures exceeding 50°C to prevent damage.
Specifies battery charging temperature ranges to avoid damage and performance degradation.
Identifies key components of the FLIR ONE Edge camera with reference to illustrations.
Download and install the FLIR ONE application from your preferred app store.
Connect the FLIR ONE Edge camera to your mobile device using the extending arm.
Press and hold the On/Off button until LEDs flash to boot the camera.
Start the FLIR ONE application on your mobile device.
Follow app prompts to set up and pair the camera with your mobile device.
Press and hold the On/Off button until the LEDs turn off to power down.
To Next Page
