910-0001-00-MAN-R06 FLIR Proprietary Information Page 66 of 81
Information contained in this document pertains to a Canadian origin product that is controlled as "dual use" by the Canadian
government. However, when in the United States or possessed by a US person, it may be considered a defense article from the US Government's
perspective. US government authorization may be required for re-transfer to a foreign person. If you have any questions, please contact FLIR's
Global Trade Compliance group at exportquestions@flir.com .
2.2.10 Radar Configuration Parameters
Radar Configuration Parameters control various aspects of the radar operation. There are four (4)
groups of configuration parameters.
Group Description
Base Link
Contains the radar identification and communication parameters
Current
Contains the set of parameters that are currently used
Default
Contains the default set of parameters
Factory
Contains the factory set of parameters
Table 4 - Configuration Parameters Groups
2.2.10.1 Parameters Access
Only certain parameters can be modified by the operator, depending on the login level. The Operator
login level does not allow parameter modifications, but the Administrator login level allows parameter
changes shown in Table 5. Table 6 lists the name and description of all parameters.
To Next Page
Loading...
Need help?
General
