910-0001-00-MAN-R06 FLIR Proprietary Information Page 71 of 81
Information contained in this document pertains to a Canadian origin product that is controlled as "dual use" by the Canadian
government. However, when in the United States or possessed by a US person, it may be considered a defense article from the US Government's
perspective. US government authorization may be required for re-transfer to a foreign person. If you have any questions, please contact FLIR's
Global Trade Compliance group at exportquestions@flir.com .
zone gap parameter.
Target_hist_tm Length of time in the past to keep a track trajectory. This
parameter affects the PPI display only, and not the XML data
output.
Target_hist_int Interval at which a track position is recorded. This parameter
affects the PPI display only, and not the XML data output.
Target_save_tm Length of time during which lost targets are displayed on the PPI.
This parameter affects the PPI display only, and not the XML data
output.
Intruder_save_tm Length of time during which lost intruders are displayed on the
PPI. This parameter affects the PPI display only, and not the XML
data output.
RD_target_up_az Radar scan start azimuth angle. Refer to the Installation Manual
to determine the optimum update azimuth.
Table 6 - Configuration Parameter Descriptions
To Next Page
Loading...
Need help?
General
