What to do if my FLIR Touch Panel does not turn on or keeps turning off?
If your FLIR Touch Panel doesn't turn on or keeps turning off, it might be due to software corruption. As a solution, try re-flashing the latest software from the Raymarine website. For display products, you can perform a 'Power on Reset'; however, this will delete all settings, presets, and user data, reverting the unit to factory defaults.
General| Touchscreen | Yes |
|---|---|
| Waterproof Rating | IPX6 |
| Display Resolution | 640 x 480 pixels |
| Power Supply | 12V DC |
| Resolution | 640 x 480 |
| Voltage | 12V DC |
| Display Size | 5.7" |
Guidelines for touchscreen usage, environmental factors, and optional accessories.
Instructions for handling chart and memory cards to prevent damage or data loss.
Recommendations for cleaning the product safely and avoiding damage.
Information on product limitations, data accuracy, third-party licenses, and warranty.
Details about the handbook, its structure, conventions, and software revision.
Information on available product documentation, including installation instructions and new features.
Instructions for powering the display on, off, and using PowerSave mode.
Description of controls for various Raymarine MFD series and UniControl.
Guidance on touchscreen gestures, locking, and unlocking the screen.
Explanation of the Homescreen layout for touch-only and HybridTouch displays.
Steps for initial setup, including language, boat details, units, and system configuration.
Procedures for saving, backing up, and restoring user data, settings, waypoints, routes, and tracks.
Instructions for taking screenshots and resetting system settings to factory defaults.
Options for setting system language and customizing vessel details for the display.
Setting preferred units of measurement, date formats, and time zone.
Configuring display behavior, shared brightness, databar content, and databoxes.
How to open, browse, search, and close PDF documents and user manuals.
Steps to enable autopilot control for SeaTalk, SPX SeaTalkng, and Evolution autopilots.
Understanding the Pilot Control dialog for various modes and engaging the autopilot.
Procedures for commissioning the autopilot system, including vessel hull type and drive type.
Understanding alarm types, color coding, and how to acknowledge active alarms.
Using the Alarm Manager to enable/disable alarms, adjust thresholds, and view history.
Steps to activate the Man Overboard alarm and resume normal operation.
Enabling DSC VHF radio integration and understanding distress message displays.
Estimating fuel remaining, calculating distance, and configuring fuel manager settings.
Recording fuel fills, setting low fuel alarms, and resetting fuel used readings.
Understanding AIS data, target types, status symbols, and hardware requirements.
How to enable AIS overlay in Chart and Radar applications and use the context menu.
Displaying AIS vectors, options, and managing tracked target lists.
Identifying dangerous targets and using collision avoidance features like Target Interception.
How to create, place, edit, and manage waypoints in different applications.
Steps to build, navigate, review, and edit routes, including automatic route generation.
Creating, reviewing, editing, and managing tracks, including track interval settings.
Features for route planning, navigation, electronic charts, and graphical overlays.
Information on Raster, Vector, and Navionics charts, and how to select cartography types.
How to adjust chart range, pan the chart, and switch between 2D and 3D views.
Enabling and configuring overlays like AIS, Radar, Aerial photos, and Databoxes.
Explanation of Traditional, CHIRP, DownVision, and SideVision sonar technologies and features.
Guidance on selecting sonar modules, transducers, channels, and speed transducers.
Understanding the sonar image, bottom structure representation, and factors influencing display.
Setting depth range, switching between auto/manual modes, and adjusting scroll speed.
Configuring Gain, Intensity, Contrast, Surface Filter, TVG, and Noise Filter settings.
Understanding the Radar screen, status symbols, and feature comparison.
Procedures for checking Radar operation and adjusting bearing alignment.
Factors affecting Radar image quality and selecting appropriate modes and ranges.
Utilizing AIS, MARPA, Target Interception, and Guard Zone Alarm for collision avoidance.
Adjusting Gain, Rain, and Sea clutter controls directly on the touchscreen.
Viewing data, customizing datapages, and adding new custom datapages.
Categorized list of data items available for display in the Data application, databoxes, and databar.
Configuring engine identification, setting RPM range, and managing boat details.
Features for viewing analog/IP camera feeds, recording, and taking photos.
Displaying multiple camera feeds using Quad View and switching between feeds.
Instructions for recording IP camera feeds, stopping, playing back, and managing video files.
Methods for taking photos using capture, timer, or remote control, and viewing them.
Understanding the thermal camera image, status icons, and basic controls like pan, tilt, and zoom.
Procedures for setting up the camera, adjusting image settings, and using scene presets.
Managing surveillance mode, stabilization, point mode, and high power settings.
Understanding the fixed mount thermal camera application, image, and status icons.
Steps for setting up the camera and adjusting image contrast, brightness, and color.
Overview of controls, camera standby, pausing, and accessing the fixed mount camera menu.
Enabling Wi-Fi, connecting to access points, and managing network credentials.
Steps to connect smart devices and access product web interfaces.
Information on Raymarine mobile apps (RayView, RayRemote, RayControl) and device compatibility.
List of compatible NMEA 2000 entertainment systems and audio application controls.
Managing audio tracks, radio stations, SiriusXM, Pandora, and browsing media files.
Powering the entertainment system on/off and selecting audio sources for different zones.
Steps to connect, enable Bluetooth, and pair a media player device with the MFD.
Using on-screen media player controls and controlling audio wirelessly with a remote.
Controlling Raymarine Sirius receivers, browsing channels, and adding favorites.
Controlling Fusion systems, browsing media sources, and managing playback functions.
Adjusting volume levels for individual zones and selecting the system to control.
Available settings for tone controls, zone configuration, searching, tuner region, and artwork.
Understanding GRIB files, data types, and viewer compatibility.
Procedure for logging into the Chart Store, downloading files, and saving animations.
How to view data and graphs for specific locations and hide map text.
Steps for initial setup, understanding display graphics, and weather symbols.
Navigating the weather map, viewing location-specific data, and accessing weather reports.
Viewing animated weather graphics like NOWRad, Wind, Waves, and setting up watchbox alert ranges.
Diagnosing and resolving issues related to power-up problems and Radar connection.
Troubleshooting GNSS 'No Fix' status and issues with automatic route generation.
Resolving sonar scrolling issues, crosstalk interference, and Wi-Fi connection problems.
Addressing touchscreen alignment, erratic behavior, and system data availability problems.
Information on obtaining product support, warranty service, and contact details.
Accessing video tutorials, training courses, FAQs, technical forums, and third-party supplier details.
Connecting the multifunction display to an EmpirBus NXT vessel control system.
Steps for loading a configuration file to enable and customize the switch panel application.
Understanding the switch panel application, mode pages, vessel controls, and using switches.
To Next Page
