What to do if my FLIR Touch Panel does not turn on or keeps turning off?
If your FLIR Touch Panel doesn't turn on or keeps turning off, it might be due to software corruption. As a solution, try re-flashing the latest software from the Raymarine website. For display products, you can perform a 'Power on Reset'; however, this will delete all settings, presets, and user data, reverting the unit to factory defaults.
General| Display Size | 7 inches |
|---|---|
| Resolution | 800 x 480 pixels |
| Touchscreen | Yes |
| WiFi Connectivity | Yes |
| Waterproof Rating | IPX6 and IPX7 |
| Ethernet | Yes |
| GPS | GPS/GLONASS |
| Operating Temperature | -25°C to +55°C (-13°F to +131°F) |
| Cartography | Navionics, C-MAP |
Information on touchscreen operation and environmental factors affecting performance.
Covers powering the unit on/off, PowerSave mode, and operating controls for various display series.
Guides through startup wizard settings, boat details, time/date, data master, and system resets.
Covers GNSS status, enabling autopilot, engine identification, AIS functions, and shared preferences.
Explains memory card usage, simulator mode, and system software updates.
Details how to save all user data to a memory card and save specific data like waypoints, routes, tracks.
Procedures for resetting system settings and data to factory defaults.
Instructions for enabling autopilot control for SeaTalk, SPX SeaTalkng, and Evolution autopilots.
Procedures for disengaging the autopilot, including Standby mode and safety precautions.
Details pilot setup options, vessel hull type selection, and commissioning procedures.
Covers accessing the Alarm Manager, enabling/disabling alarms, changing thresholds, and viewing history.
Describes activating the MOB function, its operation modes, and how MOB data is displayed.
Covers fuel estimation, enabling/disabling, setup, fuel logging, low fuel alarm, and fuel range rings.
Covers waypoint display, context menu, placement, lists, editing, and search functions.
Details route building, features, navigation, editing, showing/hiding, and erasing routes.
Explains track creation, intervals, reviewing/editing, showing/hiding, and erasing tracks.
Details transducer calibration, multiple module support, and reducing sonar crosstalk interference.
Provides instructions to restore the sonar unit to its factory default values.
Details how to display and identify engine data using the Data application and the identification wizard.
Details recording IP camera feeds, playback, stopping recording, and taking photos.
Details Raymarine mobile apps like RayView, RayRemote, and RayControl, including compatibility.
Provides guidance on diagnosing and correcting common problems with installation and operation.
Addresses issues with the unit not turning on or repeatedly turning off, and re-boot loops.
Covers issues related to Radar connection, transmitting, Wi-Fi credentials, and bearing alignment.
Addresses problems with GNSS status, such as 'No Fix' icon, and external receiver location issues.
Details warnings during automatic route generation and resolutions for issues like insufficient data.
Covers issues like scrolling image not displayed, no depth reading, lost bottom lock, and poor image quality.
Explains SideVision and multiple sonar crosstalk interference and methods to reduce it.
Addresses common problems with thermal cameras like video not displayed, unresponsive controls, and noisy images.
Covers issues with instrument, engine, or system data availability and position data display.
Addresses problems with video inputs, such as no signal message or cable connection faults.
Covers issues related to Wi-Fi connection, network discovery, signal strength, and interference.
Addresses problems with wireless connections, media player control, and weak or intermittent Bluetooth signal.
Covers touchscreen issues like lock enabled, bare finger operation, calibration needs, and saltwater deposits.
Provides steps to realign the touchscreen for improved accuracy.
Addresses erratic display behavior, unexpected resets, system crashes, and corrupt data issues.
To Next Page
