FLIR RAYMARINE A75 WiFi - Custom Channels; Creating a Custom Channel; Renaming Custom Channels; Deleting Custom Channels

15.9 Custom channels
When connected to an External Traditional sonar
module such as the CP300 or an External CHIRP
sonar module such as the CP450C, custom channels
can be created from the sonar module’s default
channels; excluding Auto channels. This enables
some settings to be customized and saved as a
separate channel. These channels can then be
assigned to individual Sonar application panes. Up
to 10 custom channels can be created for each
compatible sonar module.
When changed the following settings are saved to
the channel that is currently displayed:
• Sensitivity settings
• Range settings
• Frequency tuning — Only 2 frequency settings
can be saved per transducer / sonar module
combination.
Note: Performing a Sonar Reset will erase all
custom channels for the current sonar module.
Creating a custom channel
To create a custom channel follow the steps below.
From the Sonar application menu:
1. Select Channel.
The Channel selection page is displayed.
2. Select the tab for the sonar module you want to
create a custom channel for.
3. Select the Channel options icon located next to
the channel that you want to use, or
4. using non–touch controls, select the channel
and then press and hold the OK button until the
options screen is displayed.
5. Select Copy Channel.
The on-screen keyboard is displayed.
6. Enter the name you want to assign to your new
channel.
7. Select SAVE.
The new channel is now available in the channel
list for the relevant sonar module.
8. Select the new channel to display it in the Sonar
application pane.
Changes made to the Sensitivity, Range or
Frequency tuning settings are automatically
saved to the channel displayed.
You can now assign the new channel to a Sonar
application pane.
Renaming custom channels
With the Channel selection page displayed:
1. Select the tab for the sonar module that contains
the channel you want to rename.
2. Select the Channel options icon next to the
custom channel.
The custom channel options page is displayed
3. Select Rename.
The on-screen keyboard is displayed.
4. Enter the new name for the channel.
5. Select SAVE.
Deleting custom channels
With the Channel selection page displayed:
1. Select the tab for the sonar module that contains
the channel you want to delete.
2. Select the Channel options icon next to the
custom channel.
3. Select Delete.
A conrmation dialog is displayed.
4. Select Yes.
The custom channel has now been removed from
your system.
220