Erasing all waypoints in a group
You can erase all waypoints in a selected group.
With the waypoint groups list displayed:
1. Select the group that contain the waypoints you
want to erase.
A list is displayed showing all waypoints in the
selected group.
2. Select Erase Wpts.
A conrmation dialog is displayed.
3. Select Yes to erase all waypoints in the group, or
No to cancel.
All of the waypoints in the selected group are erased
from the system and the group will now be empty.
Erasing a waypoint group
Before you can erase a waypoint group you must
move or erase all the waypoints assigned to that
group.
From the Waypoint list:
1. Select the waypoint group that you want to erase.
2. Select Erase Group.
Waypoint information
When you create a waypoint, the system assigns
information regarding the location marked. You can
view and edit the details of any waypoint that has
been created and stored.
The following information is assigned or captured
for each waypoint:
• Symbol (a default symbol is assigned, or you can
select an alternative.)
• Name (a default name is assigned, or you can
select an alternative.)
• Group (new waypoints are assigned to the
‘UNSORTED’ group, or you can select an
alternative group.)
• Position (Latitude and Longitude of the waypoint.)
• Bearing and Range (Bearing and range from
vessel.)
• Temperature (requires appropriate sensor, only
for waypoints captured at the vessel position.)
• Depth (requires appropriate sensor, only for
waypoints captured at the vessel position.)
• Date and time
• Comment (you can add your own text comments
to a waypoint.)
From the waypoint information page you can also
perform the following actions:
• Goto (Start active navigation to the waypoint.)
• Show on Chart (Show the waypoint location in
the chart application.)
• Delete (Delete the waypoint from the waypoints
list.)
Displaying the waypoint list
From any application:
1. Select WPT.
2. Select Waypoint List.
The waypoint list is displayed.
Note: The waypoint list can also be accessed
directly from the Homescreen by selecting WPT.
or by going to the My Data menu and selecting
Waypoint List.
Editing waypoint details
With the Waypoint List displayed:
1. Select the waypoint you want to edit.
The waypoint information page is displayed.
2. Select the eld you want to edit.
3. Use the on-screen keyboard to make the
changes, then select the on-screen keyboard's
SAVE button.
Editing a waypoint using the context menu
With the application page displayed:
1. Select the waypoint symbol on-screen.
The waypoint context menu is displayed.
2. Select Edit Waypoint.
The edit waypoint dialog is displayed.
3. Select the eld you want to edit.
4. Use the on-screen keyboard to make the
changes, and then select the on-screen
keyboard's SAVE key.
Moving waypoints
Moving a waypoint using the context menu
With the application page displayed:
1. Select the waypoint symbol on-screen.
The waypoint context menu is displayed.
2. Select Move Waypoint.
3. Select the new position for the waypoint.
Moving a waypoint by entering new coordinates
With the Waypoint List displayed:
146
To Next Page
Loading...