FLIR RAYMARINE A75 WiFi - Waypoint Context Menu; Waypoint Placement

Waypoint context menu
Placing the cursor over a waypoint in the Radar
application or selecting and holding on a Waypoint in
the Chart application displays the Waypoint context
menu.
The context menu provides Latitude and Longitude,
and Range and Bearing from your vessel.
The Waypoint context menu also includes various
context sensitive menu options.
Accessing the context menu
1. Non-touchscreen and HybridTouch displays:
i. Move the cursor over the area or object and
pressing the OK button.
2. HybridTouch and Touch only displays:
i. Select and hold on an area or object, or
ii. With the Chart Call-out displayed select the
Call-out box.
Waypoint placement
Placing a waypoint
You can place a waypoint on a multifunction display
with a touchscreen by following the steps below.
From the Chart, Radar or Sonar application:
1. Select and hold the required location on screen.
The context menu is displayed.
2. Select Place Waypoint.
The Waypoint Saved dialog is displayed.
3. Select the Symbol eld to change the symbol
that will be used to display the waypoint in the
Chart or Radar application.
4. Select the Name eld to change the name of
the waypoint.
5. Select the Group eld to change the group that
the waypoint is assigned to.
6. Select OK to conrm the waypoint details.
Note: If there is no user interaction with
the Waypoint saved dialog for approximately 5
seconds then the waypoint is saved with the default
settings and the dialog is closed automatically.
Placing a waypoint
From the Chart, Radar or Sonar application:
1. Position the cursor at the required position.
2. Press the WPT button.
The context menu is displayed.
3. Select Place Waypoint.
The Waypoint Saved dialog is displayed.
4. Select the Symbol eld to change the symbol
that will be used to display the waypoint in the
Chart or Radar application.
5. Select the Name eld to change the name of
the waypoint.
6. Select the Group eld to change the group that
the waypoint is assigned to.
7. Select OK to conrm the waypoint details.
Note: If there is no user interaction with
the Waypoint saved dialog for approximately 5
seconds then the waypoint is saved with the default
settings and the dialog is closed automatically.
Waypoints, Routes and Tracks
143