5.7 Set-up menu options
The Set-up menu enables you to congure your MFD and connected devices.
The following menus are available:
Menu item Description Notes
Touch-Lock
Enables you to lock the touchscreen of a
touch only display when the display is paired
with a remote keypad.
Note: This option is not available on
touch-only displays which do not have a
remote keypad connected.
Note: This option is not available on
displays which have physical buttons.
• ON
• OFF (default)
Alarms
Display the Alarm Manager. Refer to
Chapter
8 Alarm management
Fuel Manager Displays the Fuel manager page
Pilot Controls Displays the Pilot Control dialog. Only available when a Raymarine autopilot
is detected on the system and Autopilot
Control is set to On.
Pilot Response
Enables selection of the pilot response level
when connected to an Evolution autopilot.
Note: Pilot Response is not available on
SPX and SeaTalk autopilots.
• Leisure
• Cruise
• Performance
Audio Controls
Displays the audio controls pop-up.
Note: Not available on non-touch
displays.
Only available when connected to an audio
device via bluetooth.
Wireless Connections
Provides access to the Wi-Fi and Bluetooth
menus.
Trip Resets Resets the chosen ground trip distance
counter to zero.
System Settings Enables you to congure the settings for
external devices connected to the display.
Maintenance
Provides diagnostic information. Also enables
you to designate the data master and reset
the display to factory settings.
76
To Next Page
Loading...