2.2 Handbook conventions
The following conventions are used throughout this handbook when referring to:
Type Example Convention
Icons
The term "select" is used in procedures involving icons to refer to the action
of selecting an on-screen icon, either using touch or physical buttons:
• Touch — Press your nger on the icon to select.
• Physical buttons — Use the Joystick to highlight the icon and press
the OK button.
The term "select" is used in procedures involving menus to refer to the action
of selecting a menu item, either using touch or physical buttons:
• Touch — Press your nger on the icon to select.
• Physical buttons — Use the Joystick to highlight the icon and press
the OK button.
Menus
The term “scroll” is used in procedures involving menus and dialogs to refer
to the action of scrolling a list or menu, either by touch or physical buttons:
• Touch — Press your nger on the menu and slide up or down to scroll.
• Physical buttons — Turn the Rotary control clockwise or anti—clockwise
to scroll.
.
Applications
The term “select” is used in procedures involving applications to refer to
the action of selecting a location, object or target on-screen using touch or
physical buttons:
• Touch — Press and hold your nger on a location to select, or
• Touch — Press and release your nger on an object or target.
• Physical buttons — Use the Joystick to highlight the location, object
or target and press the OK button.
Numeric
adjust
controls
The term “adjust” is used in procedures involving numerical adjust controls
to refer to the action of changing the numeric value using touch or physical
buttons:
• Touch — Press your nger on the up or down arrow to increase or
decrease the numeric value.
• Physical buttons — Use the Rotary control to increase or decrease the
numeric value.
With the Numeric adjust control displayed you can also select on the keypad
icon or press and hold the OK button to open a numeric keypad to enter
a new value for the setting.
Slider bar
controls
The term “adjust” is used in procedures involving slider bar controls to
refer to the action of changing the associated numeric value using touch or
physical buttons:
• Touch — Press your nger on the up or down arrow to increase or
decrease the numeric value.
• Physical buttons — Use the Rotary control to increase or decrease the
numeric value.
Document and product information
25
To Next Page
Loading...