3.16 Enabling AIS functions
Before proceeding ensure your AIS unit is connected
to NMEA Port 1.
With the homescreen displayed:
1. Select Set-Up.
2. Select System Settings.
3. Select NMEA Set-Up.
4. Select NMEA Input Port 1.
5. Select the AIS 38400 option.
6. Select Back to return to the System Settings
menu.
7. Select External Devices.
8. Select AIS Unit Set-up.
The AIS Unit Set-up menu is displayed.
9. Adjust the AIS options as appropriate.
3.17 Shared preferences
The Shared preferences scheme allows all
compatible networked MFDs and instrument
displays to share user preference settings.
When a user preference is changed on 1 display
device all compatible networked display devices
are automatically updated to use the changed
preference.
Shared preferences are applicable to the following
devices:
• MFDs networked using SeaTalk
hs
• MFDs networked using SeaTalk
ng
• SeaTalk
ng
instruments displays networked using
SeaTalk
ng
• SeaTalk instruments displays networked via a
SeaTalk to SeaTalk
ng
converter.
Note: To ensure compatibility check that
all devices are running the latest software
versions. Check the Raymarine
®
website
www.raymarine.com for the latest software for your
products.
List of shared preferences
The table below shows the settings that are shared
as part of the Shared preference scheme.
Units
• Speed units
• Distance units
• Depth units
• Wind units
• Temperature units
• Flow Rate units
• Volume Units
• Pressure units
Boat Details
• Boat Type
• Number of engines
• Number of fuel tanks
• Number of batteries
Time and Date
• Date Format
• Time Format
• Local Time (UTC) offset
System Preferences
• Bearing mode
• Variation (manual)
• Language
Data application
• Max RPM range
• RPM red zone
• RPM red zone value
Getting started
55
To Next Page
Loading...