1. Select Show/Hide.
2. Select the Group from the list that you want to
show or hide.
If Show is displayed in the list then the group will
be displayed, if Hide is displayed in the list then
the group is not displayed in the application.
3. Repeat Step 4 for each waypoint group you want
to show or hide.
4. Alternatively to show or hide all waypoints
select Show All or Hide All to show or hide all
waypoints.
13.2 Routes
A route is a series of waypoints typically used to
assist with passage planning and navigation.
A route is displayed on screen as a series of
waypoints linked by a line.
Route features
There are a range of route features for building,
navigating and managing routes.
The route features allow you to:
• Build and save a route for use when required
(stored in the route list).
• Navigate (follow) routes.
• Manage and edit routes stored on the system.
• Build a route from an existing track.
Route features are accessed from the chart
application:
• by selecting an existing route.
• by using the Build Route option from the chart
context menu.
• by using the Chart application menu: Menu >
Navigate > Follow Route or Build Route.
Note: The Route List can also be accessed from
the homescreen by selecting My Data and then
Routes.
Route building
A route can consist of a combination of:
• New waypoints
• existing waypoints
• an existing track
As each waypoint is added, it is assigned an index
number corresponding to its position in the route
and drawn on the chart using the currently specied
symbol. The following should be noted:
• When a route is being built it is not active and does
not affect any current navigation.
• You cannot save a new route if any of the
waypoints within it are currently active.
150
To Next Page
Loading...