17.5 Setting boat details from the
Data application
From the Data Set-up menu: Menu > Data Set-up.
1. Select Boat Details.
2. Select Num. of Engines, Num. Fuel Tanks, or
Num. of Batteries.
3. Select the required value.
If the number of engines is changed then the
Engine datapage is reset to display the new
number of engines.
17.6 Setting engine RPM range
and red zone
The Data application display RPM dials that can
display RPM data sent from connected engine(s).
The maximum RPM range and the RPM red zone
can be automatically set by the engines or can be
congured manually.
From the Data Set-up menu: Menu > Data Set-up.
1. Select Max RPM Range.
A list of available RPM settings is displayed.
2. Select the required RPM range, or select Auto to
allow the engine to set the maximum range.
3. Select the rst RPM Red Zone: option to switch
the red zone range between Auto and Manual.
With Auto selected the engine will set the red
zone range, with Manual selected the second
RPM Red Zone: option becomes available
4. With the rst RPM Red Zone: set to Manual
selected the second RPM Red Zone: option and
adjust to the required value.
284
To Next Page
Loading...