23.3 Pairing a Bluetooth media
player
From the Bluetooth menu: (Homescreen > Set-up >
Wireless Connections > Bluetooth)
1. Select New Bluetooth Connection.
A message is displayed prompting you to put
your media player device into discovery mode.
2. Ensure Bluetooth is enabled on your external
media player device and ensure it is ready to
be paired. For more information, consult the
instructions that accompany the device.
3. On the multifunction display, select OK in the
message dialog.
The multifunction display will search for active
Bluetooth devices.
4. Select Stop Discovery when your device
appears in the list.
5. Select the media player device in the list.
A pairing request message is displayed on the
external media device.
6. On the external media device, select Pair
(or equivalent) to accept the pairing request
message.
The multifunction display shows a message
asking you to conrm the Pairing code.
7. If the pairing code displayed on the multifunction
display matches the code displayed on the
external media device, select OK on the
multifunction display. If the code does NOT
match, repeat steps 4 to 8.
8. If the pairing was successful the multifunction
display will conrm the pairing.
The external media device is now paired with the
multifunction display.
23.4 Enabling audio control
From the Bluetooth menu: (Homescreen > Set-up >
Wireless Connections > Bluetooth)
1. Select Connection Manager.
A list of all paired Bluetooth devices is displayed.
2. Select the media player device in the list.
3. Select Audio Control > On.
Media player application
345
To Next Page
Loading...