Stop Goto, Stop Follow or Advance Waypoint
from the context menu.
6. When you are following a route or going to a
waypoint or cursor position, and select Menu
> Navigate > Stop Goto, Stop Follow, or
Advance Waypoint.
7. When you arrive at a target waypoint.
Note: When arriving at a waypoint, the dialog title
bar turns red to indicate waypoint arrival.
7.4 Pilot Bar
The Pilot Bar provides autopilot status information.
For touchscreen displays you can disengage the
autopilot using the Pilot Bar.
Pilot Bar — Track mode
Pilot Bar — Auto mode
The Pilot Bar is displayed when autopilot control
is enabled, the Pilot Bar is switched on and the
autopilot is engaged.
When the autopilot is disengaged the Pilot Bar is
hidden.
On a system containing multiple displays the Pilot
Bar can be disabled or enabled on each display.
Enabling the Pilot Bar
When connected to a SeaTalk or SeaTalk
ng
SPX
autopilot the Pilot Bar can be enabled by following
the steps below.
From the Homescreen, with autopilots controls
enabled:
1. Select Customize.
2. Select Display Preferences.
3. Select Pilot Control Bar so that Shown is
highlighted.
Selecting Pilot Control Bar will switch the Pilot
Bar between Shown and Hidden.
4. Engage the autopilot.
The Pilot Bar is now displayed at the bottom of
the screen in all applications whilst the autopilot is
engaged.
Note: When connected to an Evolution autopilot
the Pilot Bar is enabled from the Pilot Set-up page.
94
To Next Page
Loading...