13.1 Waypoints
Waypoints are used to mark specic locations or
points of interest. Waypoints can be used in the
Chart, Radar and Sonar apps. Your MFD can store
up to 3,000 waypoints which can be sorted into up
to 100 waypoint groups.
In the Chart app you can navigate to a waypoint by
selecting Goto from the Waypoint context menu.
Waypoint display examples
Waypoints in the chart application
In the chart application both active and inactive
waypoints are shown. An active waypoint is the one
that you are navigating to.
Item Description
1 Inactive waypoint
2 Active waypoint
3 Alternative waypoint symbols
The default waypoint symbol is a red ‘X’. Alternative
symbols can be used if required.
Waypoints in the radar application
In the radar application both active and inactive
waypoints are shown. An active waypoint is the one
that you are navigating to.
1. Inactive waypoint
2. Active waypoint
3. Alternate waypoint symbols
The default waypoint symbol is a red ‘X’. Alternative
symbols can be used if required.
Waypoints in the Sonar application
Waypoints in the Sonar application are represented
by a vertical line labelled WPT.
Waypoints and SideVision
When viewing SideVision
™
channels waypoints are
represented by waypoint symbols and can be placed
from the context menu.
Waypoint (MOB) button / icon
Depending on the multifunction display variant
there will be either a Waypoint (MOB) button or an
onscreen icon.
WPT
button
• c Series
• e Series
• eS Series
• RMK-9 keypad
WPT
icons
• a Series
• gS Series
Throughout this manual the term: Select WPT, refers
to pressing the physical WPT button or pressing the
on-screen WPT icon.
142
To Next Page
Loading...