4. Select Erase Wpts to erase the list of waypoints
from your system, or
5. Select Move Wpts to move the waypoints to a
new or existing group, or
6. Select Assign Symbol to assign a new symbol
to all the waypoints in the search results list.
You can also select a waypoint from the list to view
its details, or if accessed from the Chart application
set a goto or display the waypoint in the Chart
application.
Searching for waypoints by area
Waypoints can be searched for by selecting an area
in the Chart application.
From the Chart application:
1. Select Menu.
2. Select My Data.
3. Select Waypoints.
The waypoints list is displayed.
4. Select Search.
The search page is displayed.
5. Select Area.
The Chart application is displayed with the area
search menu open.
6. Select the location for the rst corner point of the
search area.
7. Select the location for the opposite corner of the
search area.
A box is drawn on the screen which covers the
selected area.
If the box is drawn in the wrong place you can
draw a new area by selecting 2 new corner points.
8. Select Search from the menu.
A list of all waypoints in the selected area is
displayed.
9. Select Erase Wpts to erase the list of waypoints
from your system, or
10.Select Move Wpts to move the waypoints to a
new or existing group, or
11. Select Assign Symbol to assign a new symbol
to all the waypoints in the search results list.
You can also select a waypoint from the list to view
its details, set a goto or display the waypoint in the
Chart application.
Waypoint symbols
A Range of waypoint symbols are available that can
be used to represent different waypoint types.
Black Cross Red Cross
Black Circle Red Circle
Black Square Red Square
Black Triangle Red Triangle
Blue Cross Green Cross
Blue Circle Green Circle
Blue Square Green Square
Blue Triangle
Green Triangle
Anchor Wreck
Buoy Fuel
148
To Next Page
Loading...