FLIR RAYMARINE A75 WiFi - Sonar Status Symbols; GPS Status Symbols; Locking the Homescreen, Databar and Data Application Configuration

Symbol Description
AIS unit is switched off, or not
connected.
AIS unit is in Silent Mode.
AIS unit is in Silent Mode, with active
alarms.
AIS unit is connected and switched
on, but has active alarms.
AIS unit is connected and switched
on, but the dangerous and lost alarm
is disabled.
Sonar status symbols
The sonar status is indicated in the databar.
Symbol Description
Symbol animated: the sonar
module is connected and
transmitting.
Symbol static: the sonar
module is connected but not
transmitting.
Symbol greyed-out: the sonar
module is not connected, or
is not detected.
GPS status symbols
The GPS receiver status is indicated in the databar.
Symbol Description
A GPS receiver is connected
and has obtained a x.
A GPS receiver is not
connected, or cannot obtain
a x.
Locking the Homescreen, Databar and
Data application conguration
The Homescreen, Databar and Data application can
be locked to prevent accidental changes to their
layout and conguration.
It is recommended that you Back-up your settings
and data before you lock the Homescreen, refer
to:
4.1 Saving user data and user settings for
instructions.
1. From the Homescreen, select Customize.
2. Select Homescreen.
3. Select Lock Homescreen.
The onscreen keyboard is displayed.
4. Enter the password that you want to use.
Important: Ensure that you retain your
Homescreen password. If you lose your password
a Power on Reset is required to unlock the
Homescreen.
5. Select Lock.
The Homescreen, Databar and Data
application layout and conguration are now
locked and cannot be changed. The Settings
and Data Reset options are also not available
when the Homescreen is locked.
To unlock the Homescreen select: Homescreen >
Customize > Homescreen > Unlock Homescreen.
and enter your Homescreen password.
Getting started
39