Once placed you can move the marker by
selecting Move Marker from the Sonar context
menu.
Note: The VRM is only available in Bottom Lock
mode when viewing the display mode in Split
screen.
15.19 Waypoints in the Sonar
application
Placing a waypoint in the Sonar application enables
you to mark a position so that you can return to it
later.
When a waypoint is placed its details are added
to the waypoint list and a vertical line showing
the waypoint symbol is displayed on-screen. The
waypoints can then be navigated from the Chart
application.
Placing a Waypoint in the Sonar
application
From the Sonar application:
1. Select and hold the required location.
The Sonar context menu is displayed.
2. Select Place Waypoint.
Placing a waypoint using the WPT
button or icon
From the Sonar application:
1. Select WPT.
The waypoint menu is displayed.
2. Whilst the waypoint menu is open:
• Select WPT again to place a waypoint at your
vessels position, or
• Select the appropriate option: Place Waypoint
At Vessel, Place Waypoint At Cursor or Place
Waypoint At Lat/lon.
Placing a Waypoint using the context
menu
You can place a waypoint in the Sonar application
using the context menu.
From the Sonar context menu:
1. Select Place Waypoint.
The Waypoint is placed at the cursors location.
and the new waypoint dialog is displayed.
2. Select OK to accept the default waypoint details,
or
3. Select a eld to edit the new waypoint’s details.
Sonar (Fishnder) application
229
To Next Page
Loading...