Chart grid
You can overlay a grid onto the Chart application
The Chart grid represents the lines of latitude and
longitude.
By default the Chart grid is switched off.
Switching the chart grid on and off
The Chart grid can be switched on and off by
following the steps below.
From the Chart application menu:
1. Select Presentation.
2. Select Overlays.
3. Select Chart Grid: so that On is selected to turn
the grid on, or
4. Select Chart Grid: so that Off is selected to turn
the grid off.
2D shading
If supported by your cartography type, you can
switch shading of land and sea contours on and off.
1. 2D shading On.
2. 2D shading Off
By default 2D shading is switched on.
Switching 2D shading on and off
2D shading can be switched on and off by following
the steps below.
From the Chart application menu:
1. Select Presentation.
2. Select Overlays.
3. Select 2D Shading: so that On is selected to
turn the shading on, or
4. Select 2D Shading: so that Off is selected to
turn the shading off.
Relief shading
Relief shading is available when using C-MAP
®
cartography and provides an overlay that indicates
the depth and altitude of terrain.
Relief shading On Relief Shading Off
Switching relief shading on and off
From the Overlays menu: Menu > Presentation
> Overlays.
1. Select Relief Shading: so that On is selected to
turn the shading on, or
2. Select Relief Shading: so that Off is selected
to turn the shading off.
Community layer
If supported by your cartography type, you can
display User Generated Content (UGC) on the Chart
application.
1. Community feature On.
2. Community feature Off.
To check if your Navionics cartography supports
community edits downloads please refer the
Navionics website:
www.navionics.com, for
information and instructions on downloading the
updates to your chart card.
Switching the community edits on and off
If supported by your cartography type, the User
Generated Content (UGC) overlay can be switched
on and off by following the steps below.
From the Chart application menu:
1. Select Presentation.
2. Select Overlays.
3. Select Community Edits: so that On is selected
to display UGC, or
4. Select Community Edits: so that Off is selected
to turn off UGC.
Chart application
189
To Next Page
Loading...