Data sources menu
This menu enables you to select the external sensors and devices that will provide data to the display.
Auto / manual selection
Each dialog enables you to view and select your preferred data source. selection of data source can
be manual or set to automatic:
• Auto — the display will automatically select a device and attempt to resolve any data conicts that may
occur where there is more than one source of data for that particular data source (for example, multiple
GPS receivers).
• Manual — once the display has performed a search for connected devices you can manually select the
preferred device from the list.
Note: Selecting the Auto option may result in the system choosing a source of data that you do not
want to use.
Device selection
Menu item Description
GPS Enables you to search for any externally-connected GPS devices, and
select the one you want to use.
GPS Datum In order for your GPS receiver and multifunction display to correlate
accurately with your paper charts, they must be using the same datum. This
option enables you to choose the data source for this datum.
Time and Date
Enables you to select the device you want to use for the time and date
information used by the display.
Heading
Enables you to select the device you want to use for heading data.
Depth
Enables you to select the device you want to use for depth data.
Speed Enables you to select the device you want to use for speed data.
Wind
Enables you to select the device you want to use for wind data.
78
To Next Page
Loading...