2. Select Close le.
The document is close and the main Doc viewer
page is displayed.
Browsing an open document
On touchscreen displays you can browse pdf
documents as detailed below.
With a pdf document open:
• Move your nger up to scroll down the
document.
• Move your nger down to scroll up the
document.
When the document width is greater than the
width of the application window, move your nger
left or right to pan the width of the document.
Note: You can also use the scroll bars to navigate
through the document.
Browsing an open document
On HybridTouch and non-touch displays you can
browse pdf documents by following the steps below.
With a pdf document open:
1. Move the Joystick Up or Down to move up and
down through the document.
2. Move the Joystick Left or Right to pan left and
right.
Changing the zoom factor
On touchscreen displays you can change the zoom
factor of the open document by following the steps
below.
With a pdf document open:
1. Select the on-screen Zoom in icon to zoom in, or
2. Select the on-screen Zoom out icon to zoom out.
Changing the zoom factor
On HybridTouch and non-touch displays (excluding
the e7 and e7D) you can change the zoom factor of
the open document by following the steps below.
With a pdf document open:
1. Use the Range out button to zoom out, or
2. Use the Range in button to zoom in.
Note: New a Series and e7 / e7D multifunction
displays do not have Range in and Range out
button.
Note: On a New c Series display only the Rotary
control can be used to change the zoom factor.
Selecting a page
You can skip to the page you want to view by
entering the page number.
With a pdf document open:
1. Select Menu.
2. Select Go to page:.
The numeric keypad is displayed.
3. Enter the page number of the page you want to
view.
4. Select OK to view the page.
Using document hyperlinks
On touchscreen displays you can use internal
document hyperlinks.
With a pdf document opened on a page containing
a hyperlink:
1. Momentarily touch your nger on the hyperlink.
You will be taken to the hyperlinked page.
Note: Document hyperlinks cannot be activated
on a New c Series display.
Searching for text
To use the nd function to search for text on touch
only display follow the steps below.
With a pdf document open:
1. Select Menu.
2. Select Find.
The on-screen keyboard is displayed.
3. Enter the keyword you want to nd.
4. Select SAVE.
The document viewer will enter nd mode and:
• You may see a ‘Searching’ icon while all
occurrences are found.
• The nd tool bar is displayed.
• The rst occurrence of the keyword is
highlighted.
5. Select Next to nd the next occurrence of the
keyword, or
6. Select Previous to go back to the last occurrence
of the keyword.
7. You can select Cancel at any time to close the
nd tool bar and return to the normal viewing.
Searching for text
On HybridTouch and non-touch displays you can
use the nd function to search for text in an open pdf
document by following the steps below.
With a pdf document open:
1. Press the Menu button.
2. Select Find.
The on-screen keyboard is displayed.
3. Enter the keyword you want to nd.
Document viewer application
89
To Next Page
Loading...